Produkter » Laser och ljusdetektion » Test och mät » Faslåsförstärkare » Miniatyr, enkel fas, 45 kHz, faslåsförstärkare

Miniatyr, enkel fas, 45 kHz, faslåsförstärkare

Artikelnr.: LIA-MV-150-S

Request a quotation
       FEATURES
  • Current and voltage input
  • Working frequency up to 45 kHz
  • Adjustable sensitivity, time constant and phase
  • Local and remote control
  • Compact and EMI-shielded case



X output,10 Hz-45 KHz, 50dB dynamic reserve, time constant up to 10 s, 3 µV to 100 mV switchable sensitivity

TWO WAYS OF PROGRAMMING

The amplifier settings - e.g. phase, gain, time constant - are controlled either by switches directly on the amplifier module or externally using a standard digital I/O computer board. The variable working frequency is determined by an external reference signal which may be e.g. the synchronization signal of a chopper wheel or the modulation signal of a laser. The current input is well suited for amplifying signals from high impedance sources like photodiodes or PMTs while the voltage input can be used to measure signals from low impedance sources like pyros or coils.

Standard delivery time: 3 weeks ARO, Conditions: Ex.Works Germany unless specified

Model LIA-MV-150-S
Standard
 
Voltage Input BNC connector
Single-ended
Instrumentation amplifier
Noise 12 nV/√Hz
 
Current Input BNC connector
Transimpedance amplifier, gain 1 kV/A
Noise 13 pA/√Hz
 
Sensitivity
(Full Scale)
Voltage: 3 µV to 100 mV, switchable in 1-3-10
Current: 3 nA to 100 µA, switchable in 1-3-10
Working Frequency 10 Hz - 45 kHz
Reference Input ±100 mV to ±5 V, switchable to TTL
Phase Adjustable 0° - 360° (8-bit resolution),
Temperature drift <0,01°/K
Demodulator 50 dB max. dynamic reserve
Time Constants 3 ms to 10 s, switchable in 1-3-10, slope switchable 6 dB or 12 dB/octave
Output X [R · cos(angle)], ±10 V full scale, short-circuit protected
Digital Control 16 TTL, CMOS, opto-isolated
8 Bits phase, 4 Bits time constant, 4 Bits sensitivity
Power Supply ±15 V, 100 mA typ.
Case 170 x 60 x 30 mm (L x W x H), Weight 370 g

Power supply via 3-pin Lemo® socket. A mating connector is provided with the device. Optional power supply PS-15 available. For further information please view the datasheet.