Produkter » Laser och ljusdetektion » Test och mät » Laser karakterisering » Beam Profile Measurement » LaserCam-HR Family-sv » New Product-sv

LaserCam-HR-UV

Artikelnr.: 1149004

Request a quotation

High-Resolution UV Laser Beam Profiling System 

The LaserCam-HR-UV camera provides a compact package at an affordable price for beam diagnostic applications from 190 nm to 355 nm.

The large format, 2/3" CMOS camera offers incredible performance, and is robust in the harsh UV wavelength environments that often degrade typical beam diagnostic cameras.

This camera offers user variable integration controlled through the powerful BeamView-USB software and an optical dynamic range of greater than 650:1. This camera can accommodate beam diameters from 0.4 mm to 6.0 mm. The compact design and single USB cable connectivity make it a great solution for demanding production line, field service, and laboratory applications.

 

Specifications
Beam Diameters (mm) 0.4 to 6.0
CW Saturation at 248 nm 90 mW/cm2 (with LDFP), 90 µW/cm2 (without LDFP)
Effective Pixel Resolution (µm) 20 x 20
Electrical Interface USB 2.0
Glassless Sensor Low Distortion Faceplate is removable
Low Distortion Faceplate (LDFP) UV grade ND filter, OD = 3.0 at 248 nm
Maximum Frame Rate (FPS) 20 (live video, no calculations), 15 (capture with calculations)
Maximum Pulse Trigger In Rate (Hz) 100 (without averaging adjacent pulses)
Modes of Operation Pulsed, CW
Pixel Size (µm) 6.7 x 6.7
Pulsed Mode Trigger Methods Trigger In (TTL)
Pulsed Saturation at 248 nm 5 mJ/cm2 (with LDFP), 5 µJ/cm2 (without LDFP)
Sensor Active Area (mm)(H x V) 8.5 x 6.8 (2/3 inch format)
Sensor Elements 1280 x 1024
Spectral Range (nm) 190 to 355
Trigger Connector BNC receptacle (trigger cable included)
USB 2.0 Cable 6 ft. standard A/B cable included
Variable Frame Integration 20 µsec to 30 msec, default at 10 msec