Mirion/Canberra CSP probe

CSP probes are completely “stand-alone”. This means that CSP probes may be used with any Mirion read-out unit, including Colibri, RadiagemRDS-32Avior or MIP 10 Digital

The CSP philosophy defines the probe as “independent” and does not need a “matched pairs” readout unit. In addition, using the CSPS software, a CSP probe can be directly connected to a PC for calibration purposes, or just to test the response of the probe, or set its alarm setpoints. This connection to a PC can be made via a wired USB cable, or even wireless via any of the CSP-COM accessories that fit on the back of the probe.

See the complete range of instruments and logger here

SAB-100

Part number: EM75864

Part number: EM75864 The SAB-100 probe could be used with any CSP survey meter or device that can handle CSP protocol. Its a phoswich detector with 100 cm² for direct measurement of alpha and beta emitters.  

SABG-100

Part number: EM81933

Part number: EM81933 The SABG-100 probe could be used with any CSP survey meter or device that can handle CSP protocol. Its a phoswich detector with 100 cm² for direct measurement of alpha, beta and gamma emitters. SABG-100 compares to the SAB-100 with its better gamma efficiency. Don't forget to order cable.

SAB-250

Part number: EM104616

Part number: EM104616 The SAB-250 probe for measurement of surface contamination is designed to be used with any CSPTM survey meter.

STTC

Part number: EM8323, EM97953

Part number: EM8323, EM97953 STTC is a wide range gamma dose CSP probe. It uses to Time-To-Count algorithm.  Cables has to be ordered separately.

SG-1R

Part number: EM75860

Part number: EM75860 The SG-1R probe for gamma measurement is designed to be used with any CSP survey meter. Its good sensitivity makes it ideal to detect gamma emitters starting from background level.

SG-2R

Part number: EM75861

Part number: EM75861 The SG-2R probe for gamma measurement is designed to be used with any CSP™ survey meter. Its very good sensitivity makes it ideal to detect gamma emitters starting from very low background levels.

SVLD

Part number: EM86790

Part number: EM86790 The SVLD probe for measurement of Very Low Dose equivalent rate is designed to be used with CSP meters such as Colibri or Radiagem

Easy-Count Field Smear/Filter Counter

Part number: EM96556, EM108330, EM108331

Part number: EM96556, EM108330, EM108331 The Easy-Count is a field deployable smear counter for measurement of surface contamination. It is designed to be used with the Colibri, RDS-32 or Avior survey meter.

SABG-15+ Pancake

Part number: EM85916

Part number: EM85916 The SABG-15+ is a part of the CSP (Canberra Smart Probe) and designed for the measurement of surface contamination. Detects alpha, beta and gamma emitters. The probe itself store key parameters, settings, calibrations, probe ID, alarm settings (10 values for each unit to display with default setting), etc.

SPAB-15 - PIPS detector

Part number: EM78766

Part number: EM78766 The SPAB-15 probe for measurement of surface contamination is designed to be used with any CSP survey meter, like Colibri, RDS-31, Avior, MIP-10, etc.  Its Silicon PIPS detector with 15 cm2 detection area makes it an ideal tool for direct measurement of alpha and beta emitters.

SA-32 Alpha Probe

Part number: EM90666

Part number: EM90666 The SA-32 probe for measurement of surface contamination is designed to be used with CSP meter such as RDS-32, Radiagem, MIP-10, Avior or Colibri.

SABP-525

Part number: EM95464

Part number: EM95464 Large area probe for alfa and beta contamination monitoring. It has a mechanical design to hold a foot and works with AVIOR as a super compact hand/foot contamination monitor. It has a presence sensor to switch between background and active measurement.  

Option: Instrument holder and Cables

SABS-579

Part number: EM99597, EM99596

Part number: EM99597, EM99596 Large area probe for floor sweep contamination monitoring. It has a mechanical design to fit a floor sweeper. Use with CSP datalogger such as Coliri. Option: Instrument holder and Cables

SN-S neutron probe

Part number: EM85810

Part number: EM85810 The SN-S is a light weight neutron probe designed for neutron surveys. The SN-S is compatible with all CSP family instruments, including CSP-COM. The SN-S exceeds ANSI N42. 34 neutron detection specifications.

SN-D-2 neutron probe

Part number: EM108072

Part number: EM108072 DN-D-2 is a neutron ambient dose-rate H*(10) probe that connects to CSP compatible meters/systems and CSP meters. It leverages all CSP benefits and uses most CSP accessories.  SN-D-2 is compliant with most recent IEC 61005, ANSI 42.

SX-2R

Part number: EM78627

Part number: EM78627 The SX-2R probe for measurement of leakage and surface contamination is designed to be used with any CSP survey meter. Its 1. 5” NaI(Tl) detector with 3 mm thickness and Beryllium window makes it an ideal tool for direct measurement of x-ray emitters.

STHF-R water proof high dose rate probe

Part number: EM84483

Part number: EM84483 The STHF-R ultra high flux probe is designed for the measurements of very high gamma dose-equivalent rates up to 1000 Sv/h which can be found in pools in nuclear power plants or in recycling facilities.

TELE-STTC-2 Telescopic probe

EM106942 for Colibri
EM106944 for RDS-31/32
EM108412 for RDS-31/32 without additional molded rings

Tele-STTC-2 supports ALARA principles by allowing the operator to obtain measurements both quickly and at increased distances, due to its maneuverability.

CSP-COM

Part number: EM82481, EM83442, EM90284, EM83437

Part number: EM82481, EM83442, EM90284, EM83437 The CSP-COM module is ideal for remote monitoring applications, monitoring radiation in hot zones without human intervention or to centralize data acquisition. It can also simplify instrument installation by eliminating cables. The CSP-COM module can be plugged into any CSP probe.

CSP-PL Programming Library

Part number: EM89696

Part number: EM89696 With CSP-PL Programming Library, CSP probes can be connected directly to a PC without the need for a survey meter. Measurements can be directly acquired, stored and displayed in any way that the computer allows.

CSPS - Canberra Smart Probe Software

Part number: EM80643

Part number: EM80643 The CSPS platform talks directly to the probe and makes it available (setup and calibration) to host instruments (Meter or PC) for further use in the field.