Contamination

Work with unsealed radioactive materials generates potential contamination of surfaces. Sensitive instruments providing early warnings of the presence of surface contamination help to prevent inadvertent transfer of radioactivity. Surface contaminations are measured as activity per unit area [Bq/cm²] for specified radio nuclides. These values are subject to regulatory limits. Surface contaminations are monitored using a variety of methods and instruments

RDS-80

Artikkelnr.: 1233-245

Artikkelnr.: 1233-245 The RDS-80 Contamination Monitor is an easy to use contamination instrument based on pancake GM-tube. Measure alpha, beta and gamma as cps or Bq/cm2. The functions comprise contamination measurements with alarm functions and automatic conversion to...

LB 124 Scint

Artikkelnr.: 43727-10

Artikkelnr.: 43727-10 LB 124 Scint is a handheld alpha-beta contamination monitor based on a 170 cm² ZnS(Ag) scintillation detector. The sophisticated reflector geometry ensures that the response is extremely flat over the entire sensitive area.  It measure...

LB 124 SCINT-300

Artikkelnr.: 48002

Artikkelnr.: 48002 The contamination monitor LB 124 Scint-300 is a flexible instrument for practical radiation protection of alpha, beta and gamma. The detector is based on ZnS scintillation technology and has a big sensitive area...

Contamination monitor - T401

Very rugged and easy to use contamination monitor. Measures alfa/beta/gamma with a geiger müller detector. Protection class of main case is IP65 and detector IP34. Battery lifetime typically 100 h. Weight 1 kg. Measures...

T201 EX-proof (ATEX)

Artikkelnr.: NORM-IS-FULL

Artikkelnr.: NORM-IS-FULL The NORM Monitor-IS (formerly T201) is a ATEX approved instrument with two probe options, Geiger Müller (GM) and scintillator. This enables users to monitor NORM in all conditions. The instrument comes complete with a...

EX-proof - Atex-Fibre

The RADOS AtexP-Fibre is a handheld contamination probe using a beta/low gamma sensitive detector and integrated electronics.  The RADOS AtexP-Fibre is the first contamination probe that complies with the requirements of the ATEX95 equipment directive....